Work Procedure

WARNING: This page is about a different variant/trim than selected.

START
With CONSULT
1. Turn ignition switch ON.
2. Select "CLSD THL POS LEAR" in "WORK SUPPORT" mode of "ENGINE".
3. Follow the instruction on the CONSULT display.
4. Turn ignition switch OFF and wait at least 10 seconds.
  Check that throttle valve moves during above 10 seconds by confirming the operating sound.
Without CONSULT
1. Check that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
  Check that throttle valve moves during above 10 seconds by confirming the operating sound.
END