LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> NV3500 HD SL, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System) >> Basic Inspection >> Accelerator Pedal Released Position Learning >> Work Procedure

Work Procedure

WARNING: This page is about a different variant/trim than selected.
  1. START 
    1. Make sure that accelerator pedal is fully released.
    2. Turn ignition switch ON and wait at least 2 seconds.
    3. Turn ignition switch OFF and wait at least 10 seconds.
    4. Turn ignition switch ON and wait at least 2 seconds.
    5. Turn ignition switch OFF and wait at least 10 seconds.

    END

scientia non olet · About LEMON Manuals