Work Procedure

CONSULT Configuration

Select "CONFIGURATION" of BCM.

When writing saved data

GO TO 2.

When writing manually

GO TO 3.

CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file".

Work End.

CONSULT Configuration

1. Select "WRITE CONFIGURATION - Manual selection".
2. Identify the correct model and configuration list. Refer to Configuration List .
3. Confirm and/or change setting value for each item.
   CAUTION: Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
   NOTE: If items are not displayed, touch "SETTING". Refer to Configuration List  for written items and setting value.
4. Select "SETTING".
   CAUTION: Make sure to select "SETTING" even if the indicated configuration of brand new BCM is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model can not be memorized.
5. When "COMMAND FINISHED", select "END".

GO TO 4.

Confirm that each function controlled by BCM operates normally.

Work End.