Data Monitor
|
Monitored item [Unit] |
Description |
|
IGN VOLT [V] |
Displays the ignition power supply voltage. |
|
CONTROL MODULE MALF [Off / On] |
Displays chassis control module malfunction. |
|
CAN DIAG STATUS [Off / On] |
Displays CAN network diagnosis status. |
|
VEHICLE SPEED [mph] |
Displays the vehicle speed. |
|
FR WHEEL SPEED [rpm] |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED [rpm] |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED [rpm] |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED [rpm] |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR [deg] |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR [G] |
Displays the decel G. |
|
SIDE G SENSOR [G] |
Displays the side G. |
|
YAW RATE SENSOR [deg/s] |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION [%] |
Displays the accelerator pedal position. |
|
SHIFT POSITION |
NOTE:
The item is indicated, but not monitored.
|
|
THROTTLE CONTROL [NORMAL / INCORR / PREV / INPOSSI] |
Displays the electric throttle status. |
|
STOP LAMP SW [ACTIVE/INACTIVE] |
Displays the stop lamp switch status. |
|
PRESS SENSOR [bar] |
Displays the brake fluid pressure. |
|
ABS [ACTIVE/INACTIVE] |
Displays ABS function status. |
|
ABS MALF [On/Off] |
Displays ABS function status. |
|
EBD [ACTIVE/INACTIVE] |
Displays EBD function status. |
|
TCS [ACTIVE/INACTIVE] |
Displays TCS function status. |
|
TCS MALF [On/Off] |
Displays TCS function status. |
|
VDC [ACTIVE/INACTIVE] |
Displays VDC function status. |
|
VDC MALF [On/Off] |
Displays VDC function status. |
|
VDC OFF SWITCH [Off / On] |
Displays VDC OFF switch status. |
|
ATC SETTING [Off / On] |
Displays the setting status of Intelligent Trace Control function by steering switch. |
|
Buckle SW [Off / On] |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH active) Possible / Impossi |
Displays the automatic brake hold active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) Off / On |
Displays the brake hold status at automatic brake hold. |
|
Slope Slow / Steep |
Displays the slope status. |
|
PB active request (VDC) REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) Normal / MALF |
Displays the chassis control module status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from chassis control module. |
|
ABH active request (CCM) REQ / NO REQ |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module. (When Vehicle stopped by driver's brake) |
|
ABH malfunction Normal / MALF |
Displays the automatic brake hold status. |
|
ABH indicator lamp Off / On |
Displays the automatic brake hold indicator lamp status. |
|
ABH active request (ADAS) 1 -- |
Not used |
|
PB RLS 1 / RLS 2 / APP 1 / APP 2 |
Displays the electric parking brake status. |
|
CCM (PB) Normal / MALF |
Displays the chassis control module status detected by electric parking brake control module. |
|
PB (ABH active) Possible / Impossi |
Displays the automatic brake hold active status at electric parking brake control module. |
|
PB malfunction status Normal / ABN 1 / ABN 2 / Not used |
Displays the electric parking brake status. |