LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> Qashqai SL >> Repair and Diagnosis >> General Information >> OEM General Information >> Basic Inspection >> Consult/GST Checking System >> Description >> CONSULT Function and System Application*1

CONSULT Function and System Application*1

FUNCTION 

Mode

Function

All DTC Reading

Display all DTCs or diagnostic items that all ECUs are recording and judging.

Work Support

This mode enables a technician to adjust some devices faster and more accurately.

Self Diagnostic Results

Retrieve DTC from ECU and display diagnostic items.

Data Monitor

Monitor the input/output signal of the control unit in real time.

CAN Diagnosis

This mode displays a network diagnosis result about CAN by diagram.

CAN Diagnosis Support Monitor

It monitors the status of CAN communication.

Active Test

Send the drive signal from CONSULT to the actuator. The operation check can be performed.

ECU Identification

Display the ECU identification number (part number etc.) of the selected system.

Function Test

This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engines, more practical tests regarding sensors/switches and/or actuator are available.

Configuration

Function to READ/WRITE vehicle configuration.

SRT & P-DTC Confirmation

The state of System Readiness Test (SRT) items, the presence or absence of permanent DTC*, and driving conditions can be checked.

DTC work support

DTC reproduction procedure can be performed speedily and precisely.

Others

Other results or histories, etc. that are recorded in ECU are displayed.

*: Permanent DTC is not applied for regions where it is not mandated.

SYSTEM APPLICATION  *1 

x: Applicable

System

All DTC Reading

Work Support

Self Diagnostic Results

Data Monitor

CAN Diagnosis

CAN Diagnosis Support Monitor

Active Test

ECU Identification

Configuration

SRT & P-DTC Confirmation

DTC work support

Others

ENGINE

x

x

x

x

x

x

x

x

-

x *2

x

-

TRANSMISSION

x

x

x

x

x

x

-

x

-

x *2

-

  • CALIB DATA

IPDM E/R

x

x

x

x

x

x

x

x

x

-

-

-

EPS / DAST 3

x

-

x

x

x

x

-

x

-

-

-

-

LASER/RADAR

x

x

x

x

x

x

x

x

-

-

-

-

HVAC

-

x

x

x

x

x

x

x

-

-

-

-

AIR BAG

x

-

x

x

x

-

-

x

x

-

-

  • TROUBLE DIAG RECORD

CHASSIS CONTROL

x

-

x

x

x

x

x

x

x

-

-

-

BCM

x

x

x

x

x

x

x

x

x

-

-

-

LANE CAMERA

x

x

x

x

x

x

-

x

-

-

-

-

TPMS

x

x

x

x

-

-

x

x

x

-

-

-

METER / M & A

-

x

-

x

x

x

-

-

-

-

-

  • Warning History

ABS

x

x

x

x

x

x

x

x

x

-

-

-

EHS/PKB

x

x

x

x

x

x

x

x

-

-

-

-

ALL MODE AWD/4WD

x

x

x

x

x

x

x

x

-

-

-

-

TELEMATICS

x

x

x

x

x

x

-

x

-

-

-

-

MULTI AV

x

-

x

x

x

x

-

x

x

-

-

-

AVM

x

x

x

x

x

x

-

x

x

-

-

-

ICC / ADAS

x

x

x

x

x

x

x

x

x

-

-

-

ICC / ADAS 2

x

-

x

x

x

x

x

x

x

-

-

-

SIDE RADAR LEFT

x

-

x

x

x

x

x

x

-

-

-

-

SIDE RADAR RIGHT

x

-

x

x

x

x

x

x

-

-

-

-

3ch CAN GATEWAY

x

-

x

-

x

x

-

x

x

-

-

-

6ch CAN GATEWAY

x

-

x

-

x

x

-

x

x

-

-

-

SONAR

x

x

x

x

x

x

x

x

x

-

-

-

*1: If GST application is equipped, functions in accordance with SAE J1979 and ISO 15031-5 can be used.

*2: Permanent DTC is not applied for regions where it is not mandated.