LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> NV200 S >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Disconnect EVAP canister control valve hose from EVAP canister control valve.
  2. Remove the EVAP canister filter from the EVAP canister filter bracket and place aside. Refer to Exploded View .
  3. Disconnect the harness connector from EVAP canister control pressure sensor.
  4. Remove the EVAP canister control pressure sensor and O-ring.
    1. Release the pawls from the EVAP canister control pressure sensor.
    2. Pull the EVAP canister control pressure sensor and O-ring straight out from the EVAP canister.
scientia non olet · About LEMON Manuals