Data Monitor

Monitor Item [Unit]

Main

Signals

Description

MOTOR FAN REQ [1, 2, 3, 4]

X

Indicates cooling fan speed signal received from ECM on CAN communication line

AC COMP REQ [On/Off]

X

Indicates A/C compressor request signal received from ECM on CAN communication line

TAIL&CLR REQ [On/Off]

X

Indicates position light request signal received from BCM on CAN communication line

HL LO REQ [On/Off]

X

Indicates low beam request signal received from BCM on CAN communication line

HL HI REQ [On/Off]

X

Indicates high beam request signal received from BCM on CAN communication line

FR WIP REQ [Stop/1LOW/Low/Hi]

X

Indicates front wiper request signal received from BCM on CAN communication line

WIP AUTO STOP [STOP P/ACT P]

X

Indicates condition of front wiper auto stop signal

WIP PROT [Off/BLOCK]

X

Indicates condition of front wiper fail-safe operation

ST RLY REQ [On/Off]

Indicates starter request signal received from ECM on CAN communication line

IGN RLY [On/Off]

X

Indicates condition of ignition relay

RR DEF REQ [On/Off]

X

Indicates rear defogger request signal received from BCM on CAN communication line

DTRL REQ [Off]

Indicates daytime running light request signal received from BCM on CAN communication line

THFT HRN REQ [On/Off]

Indicates theft warning horn request signal received from BCM on CAN communication line

HORN CHIRP [On/Off]

Indicates horn reminder signal received from BCM on CAN communication line