LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> NV200 S >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Removal And Installation >> Steering Angle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove spiral cable and steering angle sensor assembly. Refer to Exploded View .
  2. Remove the two screws (A) then carefully release the three pawls (B) on the steering angle sensor (2) and remove.
    GNSALHIA0271Z-271Courtesy of NISSAN NORTH AMERICA, INC.
    • 1: Spiral cable
scientia non olet · About LEMON Manuals