LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Brake System) >> Unit Disassembly And Assembly >> Front Disc Brake >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2018 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install bleeder valve and cap.
  2. Apply rubber grease to piston seal (1), and install to cylinder body.
    GNSJPFIA0039Z-039Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse piston seal.
  3. Apply rubber grease to piston boot (1). Cover the piston (2) end with piston boot, and install cylinder side lip on piston boot securely into a groove on cylinder body.
    GNSJPFIA0040Z-040Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse piston boot.
  4. Apply new brake fluid to piston (1). Push piston into cylinder body by hand and push piston boot (2) piston-side lip into the piston groove.
    GNSJPFIA0034Z-034Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Press the piston evenly and vary the pressing point to prevent cylinder inner wall from being rubbed.
scientia non olet · About LEMON Manuals