LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Security Control System) >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument lower panel LH. Refer to Removal and Installation .
  2. Disconnect the harness connector from the NATS antenna amp and the push button ignition switch.
  3. Release the pawl on each side of NATS antenna amp and remove from the instrument pad (LH).
  4. Release the pawl on each side and remove the NATS antenna amp from the push-button ignition switch.
scientia non olet · About LEMON Manuals