LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2018 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 5) >> DTC/Circuit Diagnosis >> P0113 IAT Sensor >> Component Inspection

Component Inspection

  1. CHECK INTAKE AIR TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect mass air flow sensor harness connector and reconnect it again.
    3. Turn ignition switch ON.
    4. On CONSULT screen, select "ENGINE" >> "DATA MONITOR" >> "INT/A TEMP SEN".
    5. Check that the indicated value of "INT/A TEMP SEN" is almost the same as intake air temperature.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace mass air flow sensor. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals