Can Communication Control
WARNING: This page is about a different car, the 2017 Nissan Micra, 2016 Nissan Micra, and 2015 Nissan Micra. However, it is still accessible from the selected car via links, so may be relevant.
When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN communication recovers normally, it also returns to normal control.
IF NO CAN COMMUNICATION IS AVAILABLE WITH ECM
| Control part |
Fail-safe operation |
| Cooling fan |
- The cooling fan relay turn ON when the ignition switch is turned ON (Cooling fan HI operation)
- The cooling fan relay turn OFF when the ignition switch is turned OFF
|
| A/C compressor |
A/C relay OFF |
IF NO CAN COMMUNICATION IS AVAILABLE WITH BCM
| Control part |
Fail-safe operation |
| Headlamp |
- Turns ON the headlamp low relay when the ignition switch is turned ON
- Turns OFF the headlamp low relay when the ignition switch is turned OFF
- Headlamp high relay OFF
|
- Parking lamp
- Side marker lamp
- License plate lamp
- Illumination
- Tail lamp
|
- Turns ON the tail lamp relay when the ignition switch is turned ON
- Turns OFF the tail lamp relay when the ignition switch is turned OFF
|
| Front wiper motor |
- The status just before activation of fail-safe control is maintained until the ignition switch is turned OFF while the front wiper is operating at LO or HI speed.
- The wiper is operated at LO speed until the ignition switch is turned OFF if the fail-safe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.
- Returns automatically wiper to stop position when ignition switch is turned ON if fail-safe control is activated while front wiper motor is operated and wiper stop in the other position than stop position.
|
| Horn |
Horn OFF |