Linking Key Fob To Meter Display Function Procedure

Performing the following operation associates the registered driving position with Intelligent Key. When driver door unlock operation is performed by Intelligent Key or driver door request switch, display of the registered driving position and turnout operation can be performed.

1. STEP 1 

   Check the following conditions:

   • Ignition switch: ON
   • Initialization: done
   • Driving position: registered

   GO TO STEP 2  .

2. STEP 2 
   1. Switch ignition from ON to OFF (ADP memory automatically at the ignition OFF timing).

   GO TO STEP 3  .

3. STEP 3 

   Confirm the operation of each part with memory operation and linking a key fob to the meter display operation.

   Inspection End.