Component Inspection

1. Reconnect all harness connectors disconnected.
2. Turn ignition switch ON.
3. Check the voltage between ECM harness connector and ground.

   ECM			Condition		Voltage
   Connector	Terminal
   	+	-
   E19	160 (APP sensor 1 signal)	161	Accelerator pedal	Fully released	0.6 - 0.9 V
   				Fully depressed	3.9 - 4.7 V
   	153 (APP sensor 2 signal)	154		Fully released	0.3 - 0.6 V
   				Fully depressed	1.95 - 2.4 V

Is the inspection result normal?

YES

INSPECTION END

NO

GO TO 2.

Replace accelerator pedal assembly. Refer to Exploded View .

INSPECTION END