LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Pathfinder SL, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (LH Front Only Auto Down) >> DTC/Circuit Diagnosis >> Encoder >> Driver Side >> Diagnosis Procedure >> Encoder Circuit Check

Encoder Circuit Check

  1. CHECK ENCODER OPERATION

    1. Connect front power window motor LH.
    2. Turn ignition switch ON.
    3. Check signal between main power window and door lock/unlock switch connector D23 and ground with oscilloscope.
      Signal name Terminals Signal
      (Reference value)
      (+) (-)
      Main power window and door lock/unlock switch connector Terminal
      Encoder signal 1 D23 5 Ground Refer to following signal
      Encoder signal 2 4
      G06934392Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 2  .

  2. CHECK FRONT POWER WINDOW MOTOR LH POWER SUPPLY

    1. Turn ignition switch ON.
    2. Check voltage between front power window motor LH connector D9 and ground.
      Terminal Voltage
      (Approx.)
      (+) (-)
      Front power window motor LH connector Terminal
      D9 4 Ground 10

    Is the inspection result normal?

    YES 

    GO TO STEP 4  .

    NO 

    GO TO STEP 3. 

  3. CHECK HARNESS CONTINUITY 1

    1. Turn ignition switch OFF.
    2. Disconnect main power window and door lock/unlock switch and front power window motor LH.
    3. Check continuity between main power window and door lock/unlock switch connector D23 and front power window motor connector D9.
      Main power window and door lock/unlock switch connector Terminal Front power window motor LH connector Terminal Continuity
      D23 14 D9 4 Yes
    4. Check continuity between main power window and door lock/unlock switch connector D23 and ground.
      Main power window and door lock/unlock switch connector Terminal Ground Continuity
      D23 14 No

    Is the inspection result normal?

    YES 

    Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness or connectors.

  4. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect front power window motor LH.
    3. Check continuity between front power window motor LH connector D9 and ground.
      Front power window motor LH connector Terminal Ground Continuity
      D9 6 Yes

    Is the inspection result normal?

    YES 

    GO TO STEP 6  .

    NO 

    GO TO STEP 5  .

  5. CHECK HARNESS CONTINUITY 2

    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window and door lock/unlock switch connector D23 and front power window motor LH connector D9.
      Main power window and door lock/unlock switch connector Terminal Front power window motor LH connector Terminal Continuity
      D23 12 D9 6 Yes

    Is the inspection result normal?

    YES 

    Check main power window and door lock/unlock switch. Refer to COMPONENT INSPECTION .

    NO 

    Repair or replace the harness or connectors.

  6. CHECK HARNESS CONTINUITY 3

    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window D23 and door lock/unlock switch connector and front power window motor LH connector D9.
      Main power window and door lock/unlock switch connector Terminal Front power window motor LH connector Terminal Continuity
      D23 5 D9 3 Yes
      4 5
    3. Check continuity between main power window and door lock/unlock switch connector D23 and ground.
      Main power window and door lock/unlock switch connector Terminal Ground Continuity
      D23 5 No
      4

    Is the inspection result normal?

    YES 

    Replace front power window motor LH. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness or connectors.

scientia non olet · About LEMON Manuals