Removal And Installation: Installation

Installation is in the reverse order of removal.

CAUTION:

Fix transaxle assembly to a suitable jack.
The transaxle assembly must not interfere with the wire harnesses and clutch tube.
When installing transaxle assembly, do not bring input shaft into contact with clutch cover.
Tapping work for tapping bolts is not applied to new clutch housing. Do not perform tapping by other than screwing tapping bolts because tapping is formed by screwing tapping bolts into clutch housing.

Tighten transaxle assembly bolts to the specified torque. The figure is the view from the engine.

G08199802

Courtesy of NISSAN NORTH AMERICA, INC.

Bolt symbol	A	B	C	D
Insertion direction	Transaxle to engine	Engine to transaxle
Quantity	2	3	2	1
Bolt length " " mm (in)	55 (2.17)		49 (1.93)	69 (2.72)
Tightening torque N•m (kg-m, ft-lb)	48.0 (4.9, 35)