LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Maxima SL >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C160A: Heat Protection >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. DTC REPRODUCTION PROCEDURE

    G-20 CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform "Self Diagnostic Result" mode of "EPS".

    Is DTC "C160A" detected?

    YES 

    Go to WORK FLOW .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals