LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Basic Inspection >> Parking Brake Shoe >> Break-In Procedure

Break-In Procedure

  1. Perform parking brake break-in (drag run) operation by driving vehicle under the following conditions:
    • Drive the vehicle forward.
    • Maintain vehicle speed at approximately 40 km/h (25 MPH) keeping it constant in forward direction.
    • Apply the parking brake at the constant operating force specified. Approximately 200+49.0 Nm (20.4+5 kg-f, 45+11 lb-f).
    • Release the parking brake after approximately 5+5/-0 seconds.
    CAUTION:

    To prevent lining from getting too hot, allow a cool off period of approximately 5 minutes after every break-in operation.

  2. Check parking brake control device assembly stroke. Refer to INSPECTION .
    CAUTION:

    Readjust as necessary if it is outside the standard specifications.

scientia non olet · About LEMON Manuals