LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Security Control System (With Intelligent Key System) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210D STARTER RELAY ON When comparing the following items, IPDM E/R detects that starter relay is stuck in the ON position for 1 second or more:
  • Starter control relay signal (CAN) from BCM
  • Starter relay status signal (CAN) from BCM
  • Starter control relay and starter relay status signal (IPDM E/R input)
  • Starter control relay control signal (IPDM E/R output)
  • Transmission range switch signal input
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • Harness or connectors

    (Starter relay circuit is open or shorted.)

  • IPDM E/R
  • BCM
  • Starter relay
scientia non olet · About LEMON Manuals