Component Function Check

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CHECK OPERATION OF METER BUZZER
1. Select "BUZZER" of "BCM" using CONSULT.
2. Perform "LIGHT WARN ALM" in "Active Test".
Does meter buzzer activate?

YES

Inspection End.

NO

GO TO STEP 2.

CHECK COMBINATION METER INPUT SIGNAL

Select "Data Monitor" of "METER/M&A" using CONSULT and check the "BUZZER" monitor value.

Monitor item	Condition	Status
BUZZER	Under the condition of buzzer input	On
BUZZER	Except above	Off

Is the inspection result normal?

YES

Replace combination meter. Refer to REMOVAL AND INSTALLATION (Type A) or REMOVAL AND INSTALLATION (Type B).

Replace BCM. Refer to REMOVAL AND INSTALLATION (with Intelligent Key system) or REMOVAL AND INSTALLATION (without Intelligent Key system).