LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System (Introduction, Wiring Diagrams And Basic Inspection)) >> Basic Inspection >> Accelerator Pedal Released Position Learning >> Work Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

  1. START

    1. Make sure that accelerator pedal is fully released.
    2. Turn ignition switch ON and wait at least 2 seconds.
    3. Turn ignition switch OFF and wait at least 10 seconds.
    4. Turn ignition switch ON and wait at least 2 seconds.
    5. Turn ignition switch OFF and wait at least 10 seconds.

    END