LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Versa Note S Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Window Control System) >> Removal And Installation >> Power Window Main Switch >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove screw (A) from main power window and lock/unlock switch finisher assembly (1).
    Fig 1: Screw (A) And Main Power Window And Door Lock/Unlock Switch Finisher
    GNSAWKIA2536ZZ-536Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove main power window and door lock/unlock switch finisher assembly (1) using a suitable tool (B).

    MARU-H : Pawl

  3. Disconnect the harness connector from the main power window and door lock/unlock switch.
  4. Separate main power window and door lock/unlock switch (1) from main power window and door lock/unlock switch finisher using a suitable tool.
    Fig 2: Removing Main Power Window And Door Lock/Unlock Switch
    G08204186Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not bend back the pawls on the switch finisher too far or breakage may occur.

scientia non olet · About LEMON Manuals