LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Roof) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> Special Repair Requirement >> Anti-Pinch Function

Anti-Pinch Function

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully open the moonroof to the full open position.
  2. Place a piece of wood at the fully closed position.
  3. Close the moonroof completely with auto-slide close function.
  4. Moonroof should make contact and then tilt up in reverse for 150mm (5.91 in.) (approx.).
CAUTION:
  • Do not test the anti-pinch function with your hands or other part of body parts because they may be pinched.
  • Depending on environment and driving conditions, if a similar impact or load is applied to the moonroof it may lower.
  • Test the auto-slide operation before inspection when the system initialization is performed.
  • Perform the initialization procedure when the auto-slide operation or anti-pinch function does not operate normally.
scientia non olet · About LEMON Manuals