Removal And Installation: Installation
Installation is in the reverse order of removal.
CAUTION:
- Do not reuse piston rod lock nut.
- Do not reuse the lower strut nuts.
- Install the front coil spring and strut with the identification mark (A) of the strut mount insulator facing toward the front of the vehicle and the arrow (B) facing the outboard side.
NOTE:
The identification mark "0" shows the (RH) strut mount insulator and "1" shows the (LH).
- Perform the final tightening of the bolts and nuts under unladen conditions with the tires on level ground.
- Complete the inspection. Refer to INSPECTION .
- After replacing the strut, always follow the disposal procedure to discard the old strut. Refer to DISPOSAL .