Precautions For Drive Shaft

Observe the following precautions when disassembling and assembling drive shaft.

• Do not disassemble joint sub - assembly because it is non - overhaul parts.
• Perform work in a location which is as dust - free as possible.
• Clean the parts before disassembling and assembling.
• Prevent the entry of foreign objects during disassembly of the service location.
• Reassemble disassembled parts carefully in the correct order. If work is interrupted, a clean cover must be placed over parts.
• Use paper shop cloths. Fabric shop cloths must not be used because of the danger of lint on parts.
• Clean disassembled parts (except for rubber parts) with kerosene which shall be removed by blowing with air or wiping with paper shop cloths.