LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Maxima SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Intelligent Cruise Control System) >> System Description >> System >> Conventional (Fixed Speed) Cruise Control Mode Function >> System Description >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

When the system is in a standby state and the vehicle speed is between approximately 40 km/h (25 MPH) and 144 km/h (90 MPH), pushing the SET/COAST switch will start system control.

If the system is canceled by conditions 1-5 below, the system will resume control at the last set cruising speed by pushing the RESUME/ACCELERATE switch.

Cancel conditions

  1. When CANCEL switch is pressed.
  2. When brake pedal is depressed.
  3. When the vehicle slows down to more than 13 km/h (8 MPH) below the set speed.
  4. When the selector lever is not in the "D" position or manual mode.
  5. When the parking brake is applied.
  6. When the MAIN switch is turned OFF.
  7. When VDC (including the TCS) operates.
  8. When a wheel slips.
  9. When the system malfunction occurs.
scientia non olet · About LEMON Manuals