LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Transfer Case) >> Unit Disassembly And Assembly >> Transfer Case >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transfer cover. Refer to DISASSEMBLY AND ASSEMBLY .
  2. Remove ring gear shaft assembly. Refer to DISASSEMBLY AND ASSEMBLY .
  3. Remove drive pinion assembly. Refer to DISASSEMBLY AND ASSEMBLY .
  4. Remove O-ring from transfer case.
    CAUTION:
    • Never use a tool.
    • Never damage transfer case.
  5. Remove oil seals (1).
    Fig 1: Locating Oil Seals
    G08856156Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage transfer case.

  6. Remove baffle plate (1).
    Fig 2: Locating Baffle Plate
    G08856157Courtesy of NISSAN NORTH AMERICA, INC.
  7. Remove the ring gear bearing adjusting shim (transfer case side) (1) and ring gear bearing outer race (transfer case side) (2) by tapping from the 2 cutouts (Arrows) on the transfer case.
    CAUTION:

    Never damage transfer case.

    Fig 3: Locating Cutouts On Transfer Case
    G08856158Courtesy of NISSAN NORTH AMERICA, INC.
  8. Remove plug and gasket.
  9. Perform inspection after disassembly. Refer to INSPECTION .
scientia non olet · About LEMON Manuals