Component Function Check

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

DATA MONITOR

CONSULT

Select "Data Monitor" mode of "AUTO DRIVE POS".
Select "SLIDE PULSE".

Check that the function operates normally according to the following conditions:

Monitor item	Condition		Value
SLIDE PULSE	Seat sliding	Operate (forward)	Change (decrease)
		Operate (backward)	Change (increase)
		Release	No change

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .