Component Function Check

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

DATA MONITOR

CONSULT

Select "Data Monitor" mode of "AUTO DRIVE POS".
Select ""MEMORY SW 1", "MEMORY SW 2", "SET SW".

Check that the function operates normally according to the following conditions:

Monitor item	Condition		Status
MEMORY SW 1	Memory switch 1	Push	ON
MEMORY SW 1	Memory switch 1	Release	OFF
MEMORY SW 2	Memory switch 2	Push	ON
MEMORY SW 2	Memory switch 2	Release	OFF
SET SW	Set switch	Push	ON
SET SW	Set switch	Release	OFF

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .