Component Function Check

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

DATA MONITOR

CONSULT

Select "Data Monitor" mode of "AUTO DRIVE POS".
Select "MIR/SEN LH U-D", "MIR/SEN LH R-L".

Check that the function operates normally according to the following conditions:

Monitor item	Condition		Value
MIR/SEN LH U-D	Door mirror LH	Close to peak	3.4V
MIR/SEN LH U-D		Close to valley	0.6V
MIR/SEN LH R-L		Close to right edge	3.4V
MIR/SEN LH R-L		Close to left edge	0.6V

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .