Component Function Check

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

DATA MONITOR

CONSULT

Select "Data Monitor" mode of "AUTO DRIVE POS".
Select "MIR CON SW-UP/DN","MIR CON SW-RH/LH ".

Check that the function operates normally according to the following conditions:

Monitor item	Condition		Status
MIR CON SW-UP/DN	Mirror switch (up/down)	Operate	ON
MIR CON SW-UP/DN	Mirror switch (up/down)	Release	OFF
MIR CON SW-RH/LH	Mirror switch (right/left)	Operate	ON
MIR CON SW-RH/LH	Mirror switch (right/left)	Release	OFF

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .