LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Brake System) >> Unit Disassembly And Assembly >> Front Disc Brake >> Brake Caliper Assembly >> Assembly

Brake Caliper Assembly: Assembly

WARNING: This page is about a different car, the 2017 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Use NISSAN Rubber Grease during assembly.

  1. Apply rubber grease to new piston seal (1), and install on brake caliper.
    G05207993Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not reuse piston seal.

  2. Apply rubber grease to new piston boot (1). Cover the piston (2) end with new piston boot, and then install cylinder side lip on new piston boot securely into a groove on brake caliper.
    G05207994Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not reuse piston boot.

  3. Push piston (1) into brake caliper by hand and push piston boot (2) piston side lip into the piston groove.
    G05208009Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Press the piston evenly and vary the pressing point to prevent cylinder inner wall from being rubbed.

scientia non olet · About LEMON Manuals