LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Versa SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Removal And Installation >> Generator >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the generator bracket (if removed), using the following procedure.
    Fig 1: Generator Bracket Mounting Bolts Tightening Sequence
    G08200624Courtesy of NISSAN NORTH AMERICA, INC.
    1. Temporarily tighten bolt (1).
    2. Temporarily tighten bolt (2).
    3. Tighten bolts (3) and (4) to specification in numerical order as shown above.

      Tighten bolts (1) and (2) to specification.

  2. Install generator using the following procedure.
    1. Temporarily tighten the generator bolts in order from the lower to the upper.
    2. Tighten the generator bolts to the specification starting with the top bolt.
    3. Install "B" terminal harness and "B" terminal nut.
      CAUTION:

      Be sure to tighten "B" terminal nut carefully.

  3. Install and check the tension of the drive belt. Refer to REMOVAL AND INSTALLATION .
  4. Installation of the remaining components is in the reverse order of removal.
scientia non olet · About LEMON Manuals