Removal And Installation: Removal
- Perform a CPU memory erase on the EPS with CONSULT before removal.
- Disconnect the battery cable from the negative terminal. Refer to REMOVAL AND INSTALLATION (BATTERY)
- Remove instrument lower panel (LH). Refer to REMOVAL AND INSTALLATION .
- Disconnect harness connectors from EPS control unit.CAUTION:
Hold and pull the connector housing, do not pull on harness when disconnecting connectors. Also, do not grip, collapse or apply excessive force to the connector.
- Remove screws and EPS control unit from steering column.
- Remove bolts and bracket plate from steering column (if necessary).