LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Versa Note SL >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (With Intelligent Key) >> Basic Inspection >> Additional Service When Replacing BCM >> Work Procedure >> Diagnostic Test

Diagnostic Test

  1. SAVING VEHICLE SPECIFICATION

    G-20 CONSULT Configuration

    Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .

    NOTE:

    If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

    GO TO STEP 2  .

  2. REPLACE BCM

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

    GO TO STEP 3  .

  3. WRITING VEHICLE SPECIFICATION

    G-20 CONSULT Configuration

    Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to WORK PROCEDURE .

    GO TO STEP 4  .

  4. INITIALIZE BCM (NATS) (IF EQUIPPED)

    Perform BCM initialization. (NATS)

    GO TO 5.

  5. REGISTER INTELLIGENT KEYS

    For initialization and registration of intelligent keys, refer to CONSULT immobilizer mode and follow the on-screen instructions.

    WORK END

scientia non olet · About LEMON Manuals