LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case) >> Unit Disassembly And Assembly >> Transfer Case >> Disassembly

Transfer Case: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove adapter case. Refer to DISASSEMBLY .
  2. Remove ring gear shaft assembly. Refer to DISASSEMBLY .
  3. Remove drive pinion assembly. Refer to DISASSEMBLY .
  4. Tap the outer race of drive pinion bearing from transfer case with a brass rod to remove outer race of drive pinion bearing (front side and rear side).
    Fig 1: Sealant Applying Area To Transfer Case
    G05370223Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage transfer case.

  5. Remove air breather hose from transfer case.
    CAUTION:

    Never damage air breather hose.

  6. Remove air breather tube from transfer case.
  7. Remove the filler plug and drain plug from the transfer case, and then remove each gasket.
  8. Remove plug from transfer case.
scientia non olet · About LEMON Manuals