LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Disassembly And Assembly >> Drive Pinion >> Disassembly

Drive Pinion: Disassembly

  1. Remove adapter case. Refer to DISASSEMBLY .
  2. Remove ring gear shaft assembly. Refer to DISASSEMBLY .
  3. Remove lock nut from the drive pinion.
  4. Put matching marks (A) on screw ends of companion flange (1) and drive pinion.
    Fig 1: Matching Marks Location
    G05370185Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Use paint to avoid scratching the surface.

  5. Remove companion flange from drive pinion with a puller.
    Fig 2: Removing Companion Flange From Drive Pinion Using Puller
    G05370186Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove drive pinion oil seal from the transfer case with a puller (A) [SST: KV381054S0 (-)].
    Fig 3: Removing Drive Pinion Oil Seal From Transfer Case Using Puller
    G05370187Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage transfer case.

  7. Remove drive pinion assembly from transfer case while tapping the drive pinion lightly with a plastic hammer.
    Fig 4: Tapping Drive Pinion Lightly With Plastic Hammer
    G05370188Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never drop the drive pinion assembly.

  8. Remove collapsible spacer from the drive pinion.
  9. Remove inner race of drive pinion bearing (rear side) from transfer case.
  10. Remove inner race of drive pinion bearing (front side) from drive pinion with a drift (A) and replacer (B).
    Fig 5: Inner Race Of Drive Pinion Bearing (Front Side) From Drive Pinion With Drift And Replacer
    G05370189Courtesy of NISSAN NORTH AMERICA, INC.
    A : Drift [SST:ST33052000 (-)]
    B : Replacer [SST: 22730000 (J - 25681)]
  11. Remove drive pinion adjusting shim from the drive pinion.
scientia non olet · About LEMON Manuals