Physical Values

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
1 (LG)	Ground	AWD solenoid power supply	Output	Engine speed: At idle	AWD LOCK indicator lamp: OFF	0 V
				Engine speed: At idle	AWD LOCK indicator lamp: ON	0 V
				Engine speed: 3, 000 RPM or more constant	AWD LOCK indicator lamp: OFF	2.5 V *
				Engine speed: 3, 000 RPM or more constant	AWD LOCK indicator lamp: ON	8 V
2 (G)	Ground	AWD solenoid ground	-	Engine speed: At idle		0 V
2 (G)	Ground	AWD solenoid ground	-	Engine speed: 3, 000 RPM or more constant		0 V
5 (BR)	Ground	AWD lock switch	Output	Ignition switch: ON	Releasing AWD lock switch	Battery voltage
5 (BR)	Ground	AWD lock switch	Output	Ignition switch: ON	AWD lock switch is hold pressed.	0 V
6 (L)	-	AWD communication	Input/Output	-		-
7 (GR)	Ground	Ignition switch	Input	Ignition switch: ON		Battery voltage
7 (GR)	Ground	Ignition switch	Input	Ignition switch: OFF		0 V
9 (W)	Ground	Power supply (AWD solenoid)	Input	Ignition switch: ON		Battery voltage
9 (W)	Ground	Power supply (AWD solenoid)	Input	Ignition switch: OFF		Battery voltage
10 (B)	Ground	Ground	-	Always		0 V
11 (B)	Ground	Ground	-	Always		0 V

*: The values are changed by throttle opening and engine speed.

CAUTION:

When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.