LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Leaf S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> DTC/Circuit Diagnosis >> Power Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. Select PUSH SW in Data Monitor mode with CONSULT.
    2. Check power switch (push switch) signal under the following conditions.
    Test item Condition Status
    PUSH SW Power switch pressed ON
    Power switch released OFF

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Go to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals