LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Juke SL, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System (NISMO RS - Introduction)) >> Basic Inspection >> Accelerator Pedal Released Position Learning >> Work Procedure

Work Procedure

WARNING: This page is about a different variant/trim than selected.

  1. START

    1. Make sure that accelerator pedal is fully released.
    2. Turn ignition switch ON and wait at least 2 seconds.
    3. Turn ignition switch OFF and wait at least 10 seconds.
    4. Turn ignition switch ON and wait at least 2 seconds.
    5. Turn ignition switch OFF and wait at least 10 seconds.

    END

scientia non olet · About LEMON Manuals