LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Altima Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B26F6: BCM >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
CONSULT Display DTC Detection Condition Possible Cause
BCM
[B26F6]		 Ignition relay ON signal is not transmitted from IPDM E/R (CAN) when BCM turns ignition relay ON.
  • Harness or connectors.
  • BCM.
  • IPDM E/R.
scientia non olet · About LEMON Manuals