Driver Side: Assembly
Assembly is in the reverse order of disassembly.
- Tighten the side air bag module nuts to specification. Refer to
"DRIVER SIDE: EXPLODED VIEW ".CAUTION: Do not reuse the side air bag module nuts.
- Tighten the chute rod nuts to specification. Refer to
"DRIVER SIDE: EXPLODED VIEW ".CAUTION: Do not reuse the chute rod nuts.
CAUTION:
- Inspect seatback pad, seatback trim and seatback trim chutes. Replace if damaged.
- Smooth out all wrinkles during assembly.
- Always route side air bag module harness in original location. Replace any deformed or damaged clips with same type and color. Always install clips in the original location in the harness.
- After work is completed, check that no system malfunction is detected causing the air bag warning lamp to illuminate.
- If a malfunction is detected by the air bag warning lamp after repair or replacement of the malfunction parts, perform the SRS final check. Refer to "SRS FINAL CHECK ".