Removal and Installation: Installation

1. Install the generator bracket (if removed), using the following procedure.
   1. Temporarily tighten bolt (1).
   2. Temporarily tighten bolt (2).
   3. Tighten bolts to specification in numerical order as shown below.
      Fig 1: Generator Bracket Mounting Bolts Tightening Sequence

      Courtesy of NISSAN NORTH AMERICA, INC.
2. Install the generator using the following procedure.
   1. Temporarily tighten the generator bolts in order from the lower to the upper.
   2. Tighten the generator bolts to the specification starting with the top bolt.
   3. Install "B" terminal harness and "B" terminal nut.
      CAUTION: Be sure to tighten "B" terminal nut carefully.

Installation of the remaining components is the reverse order of removal.