DTC Confirmation Procedure

CVT MODELS 

1. PERFORM DTC CONFIRMATION PROCEDURE 
   1. Shift selector lever to the Park (P) position.
   2. Turn ignition switch ON and wait 1 second or more.
   3. Shift selector lever to the Neutral (N) position and wait 1 second or more.
   4. Shift selector lever to the position other than Park (P) and Neutral (N), and wait 1 second or more.
   5. Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE (CVT MODELS) ".

      NO: Inspection End.

M/T MODELS 

1. PERFORM DTC CONFIRMATION PROCEDURE 
   1. Turn ignition switch ON and wait 1 second or more.
   2. Depress the clutch pedal and wait 1 second or more.
   3. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE (M/T MODELS) ".

      NO: INSPECTION END