LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Unit Disassembly And Assembly >> Final Drive >> Disassembly

Final Drive: Disassembly

  1. Remove differential side bearing inner race (clutch housing side) (1) with the following procedure.
    1. Set a suitable tool to differential side bearing inner race (clutch housing side).
    2. Remove differential side bearing inner race (clutch housing side) using Tool (A).

      Tool number: ST33061000 (J-8107-2) 

      Fig 1: Removing Differential Side Bearing Inner Race (Clutch Housing Side) Using Drift
      G04926480Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove final gear mounting bolts and remove final gear (1).
    Fig 2: Removing Final Gear Mounting Bolts And Final Gear
    G05914998Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove differential side bearing inner race (transaxle case side) (1) with the following procedure.
    1. Set a suitable tool to differential side bearing inner race (transaxle case side).
    2. Remove differential side bearing inner race (transaxle case side) using a suitable tool (A).
      Fig 3: Removing Differential Side Bearing Inner Race Using Drift (Transaxle Case Side)
      G05914999Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals