LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Unit Disassembly And Assembly >> Final Drive >> Assembly

Final Drive: Assembly

  1. Install final gear, and then tighten final gear mounting bolts to the specified torque.
    CAUTION: Replace final gear and differential case as a set.
  2. Install differential side bearing inner race (clutch housing side) using a suitable tool (A).
    CAUTION: Replace differential side bearing inner race (clutch housing side) and differential side bearing outer race (clutch housing side) as a set.
    Fig 1: Installing Differential Side Bearing Inner Race Using Drift (Clutch Housing Side)
    G05915000Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install differential side bearing inner race (transaxle case side) using a suitable tool (A).
    CAUTION: Replace differential side bearing inner race (transaxle case side) and differential side bearing outer race (transaxle case side) as a set.
    Fig 2: Installing Differential Side Bearing Inner Race (Transaxle Case Side) Using Drift
    G05915001Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals