LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Rogue Select FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case) >> System Description >> Diagnosis System (AWD Control Unit) >> CONSULT Function >> Active Test >> Test Item

Test Item

WARNING: This page is about a different variant/trim than selected.
Test item Condition Description
ETS S/V (Detects AWD solenoid)
  • Vehicle stopped
  • Engine running
  • No DTC detected
 Change command current value to AWD solenoid, and then change driving mode. (Monitor value is normal if it is within approximately ±10% of command value.)
  • Qu: Increase current value in increments of 0.2 A
  • Qd: Decrease current value in increments of 0.2 A
  • UP: Increase current value in increments of 0.02 A
  • DOWN: Decrease current value in increments of 0.02 A
CAUTION: Never energize continuously for a long time.
scientia non olet · About LEMON Manuals