Physical Values

Terminal No. (Wire color)

Description

Condition

Value (Approx.)

Signal name

Input/Output

1 (LG)

Ground

AWD solenoid power supply

Output

Engine speed: At idle

AWD LOCK indicator lamp: OFF

0 V

AWD LOCK indicator lamp: ON

0 V

Engine speed: 3, 000 RPM or more constant

AWD LOCK indicator lamp: OFF

2.5 V⁽¹⁾

AWD LOCK indicator lamp: ON

8 V

2 (G)

Ground

AWD solenoid ground

Engine speed: At idle

0 V

Engine speed: 3, 000 RPM or more constant

0 V

5 (BR)

Ground

AWD lock switch

Output

Ignition switch: ON

Releasing AWD lock switch

Battery voltage

Ignition switch: ON

AWD lock switch is hold pressed.

0 V

6 (L)

AWD communication

Input/Output

7 (GR)

Ground

Ignition switch

Input

Ignition switch: ON

Battery voltage

Ignition switch: OFF

0 V

9 (W)

Ground

Power supply (AWD solenoid)

Input

Ignition switch: ON

Battery voltage

Ignition switch: OFF

Battery voltage

10 (B)

Ground

Always

0 V

11 (B)

Ground

Always

0 V

⁽¹⁾	The values are changed by throttle opening and engine speed.

CAUTION: When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.