LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Rogue SL, FWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Driver Assistance System (Chassis Control) >> System Description >> Diagnosis System (Chassis Control Module) >> CONSULT Function >> Data Monitor

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
Item [Unit] Description
IGN VOLT [V] Displays the ignition power supply voltage.
CONTROL MODULE MALF [Off/On] Displays chassis control module malfunction.
CAN DIAG STATUS [Off/On] Displays CAN network diagnosis status.
VEHICLE SPEED [km/m] Displays the vehicle speed.
FR WHEEL SPEED [rpm] Displays the rotational speed of front RH tire.
FL WHEEL SPEED [rpm] Displays the rotational speed of front LH tire.
RR WHEEL SPEED [rpm] Displays the rotational speed of rear RH tire.
RL WHEEL SPEED [rpm] Displays the rotational speed of rear LH tire.
STEERING ANG SENSOR [deg] Displays the steering angle from the steering angle sensor.
DECEL G SENSOR [G] Displays the decel G.
SIDE G SENSOR [G] Displays the side G.
YAW RATE SENSOR [deg/s] Displays the yaw rate.
ACCELE PEDAL POSITION [%] Displays the accelerator pedal position.
THROTTLE CONTROL [NORMAL/INCORR/PREV/INPOSSI] Displays the electric throttle status.
SHIFT POSITION [Off/P/R/N/D (A)/S/L/B/1-6/M 1 - M 8/A 1 - A 6] Displayed but not used.
BRAKE SWITCH 2 [Off/On] Displays brake switch operating status (Off: close/On: open).
BRAKE SWITCH 1 [Off/On] Displays brake switch operating status (Off: open/On: close).
PRESS SENSOR [bar] Displays the brake fluid pressure.
ABS [NORMAL/ABNOR] Displays ABS function status.
ABS MALF [NORMAL/ABNOR] Displays ABS function status.
EBD [NORMAL/ABNOR] Displays EBD function status.
ACCELE PEDAL MALF [NORMAL/ABNOR] Displays the accelerator pedal status.
TCS [NORMAL/ABNOR] Displays TCS function status.
TCS MALF [NORMAL/ABNOR] Displays TCS function status.
VDC [NORMAL/ABNOR] Displays VDC function status.
VDC MALF [NORMAL/ABNOR] Displays VDC function status.
VDC OFF SWITCH [Off/On] Displays VDC OFF switch status.
PARKING BRAKE [Off/On] Displayed but not used.
DRV TRQ CTRL MODE [INITIAL/NORMAL/STOP 1/STOP 2/LIMIT 1/PROHIBI] Displays the status of correction to slightly increase/decrease the drive torque.
DRV TRQ CTRL PERMIS 1 [NO PER/PERMIS] Displays the permission status (basic requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL PERMIS 2 [NO PER/PERMIS] Displays the permission status (system requirement) of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL STOP [REQ/NO REQ] Displays the stop request status of correction to slightly increase/decrease drive torque.
DRV TRQ CTRL PROHIBIT [REQ/NO REQ] Displays the prohibition request status of correction to slightly increase/decrease drive torque.
AEB [Off/On] Displays the Active Engine Brake (corner) function operating status
ATC 1 [Off/On] Displays active trace control function operating status.
ATC 2 [Off/On] Displays active trace control function operating status.
ATC 3 [Off/On] Displays active trace control function operating status.
ATC 4 [Off/On] Displays active trace control function operating status.
ATC 5 [Off/On] Displays active trace control function operating status.
BRAKE HOLD [INACT/ACT/RELEA] Displays the status of Hill Start Assist function.
ARC BRAKE [Off/On] Displays the brake control effect of Active Trace Control function on the information display in the combination meter.
FL TIRE DISP [DEF/1] Displays tire status.
FR TIRE DISP [DEF/1] Displays tire status.
RL TIRE DISP [DEF/1] Displays tire status.
RR TIRE DISP [DEF/1] Displays tire status.
VEHICLE DISP [Off/On] Displays Active Ride Control (brake) activation status.
INTERRUPT DISP [NOREQ/HOLD1/HOLD2/HDC] Displays the interruption status.
TURN DISP [NSTEER/LEFT/RIGHT] Displays the turn status.
ALC LEVEL [0] Displayed but not used.
ALC STATUS [ACTIVE/INACT] Displayed but not used.
BRAKE HOLD DISP [INACT/ACT/RELEA] Displays the brake hold status.
ATC DISP [Off/On] Displays Active Trace Control status.
ARC BRAKE DISP [Off/On] Displays the status of Active Ride Control (brake).
HDC DISP [Off/On] Displays the Hill Descent Control.
CVT ENABLE [Off/On] Displays the CVT authorized state for Active Engine Brake.
ADA SW [Off/On] Displays the Active Engine Brake status.
COMMAND (REL) [0.0000] Displays the relative command value of Active Engine Brake.
COMMAND (ABS) [0.0000] Displays absolute command value of Active Engine Brake.
SLIP RATE [%] Displays slip ratio of Active Engine Brake.
ASA CHARACTERISTIC [Off/On] Displays Active Trace Control state on METER.
ADA CHARACTERISTIC [Off/On] Displays Active Engine Brake state on METER.