LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Rogue SL, FWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Driver Assistance System (Chassis Control) >> DTC/Circuit Diagnosis >> DTC C1BBC-00: Control Module >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. CHECK DTC DETECTION 

    With CONSULT

    1. Turn the ignition switch OFF to ON.
      CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
    2. Perform self-diagnosis for "CHASSIS CONTROL".

      Is DTC "C1BBC-00" detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO-1: To check malfunction symptom before repair: Refer to "INTERMITTENT INCIDENT ".

      NO-2: Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals